| Features: |
| RAZOR CUT 40 Plasma Cutter with 3 Year Warranty |
| Built-in Air Compressor – gives you more flexibility with a plasma cutter than ever before. Connect an external air compressor for even greater cutting power. |
| Perforated Cutting Mode – Cuts both solid material and perforated materials with ease. |
| Pilot Arc Start lets you start the arc before contacting the workpiece. This gives you better control of the torch, especially on materials with uneven or curved surfaces. |
| Produces a high-temperature plasma stream providing effortless cutting of all electrically conductive materials including steel, cast iron, stainless steel, copper, aluminium, brass. |
| Equipped with a high-quality SureGrip SC80 Plasma torch with Euro connection, developed specifically to enhance and improve the cut quality. |
| Connection of the SC80 Plasma torch provides effortless starting of the cut with powerful, fast and accurate cutting capability, additional is the benefit of longer life cycle consumable electrodes and cutting tips. |
| The RAZOR™ CUT 40 AIR boasts some serious cutting power with 10mm clean-cut and 12mm severance on the built-in air compressor, and 16mm clean-cut and 20mm severance on an external compressor. |
| Suitable for a wide range of applications including sheet metal fabrication, light industrial use, site work, automotive, ducting work, repair and maintenance services. |
| Features Plasma Starter Kit |
| Packaged in a sturdy carry case, consumable starter kits are the perfect companion to be bundled alongside machines. The kit contains all the essential consumables for a SC80 Plasma Torch. |
| UNIMIG SC80 Swirl Rings have been designed to control and swirl the compressed air around the electrode and into the nozzle. They play a crucial part in ensuring longer consumable life and clean-cut quality. Made from Vespel, they extend consumable life and are used for clean-cut quality. |
| The UNIMIG Retaining Cap is designed to hold all the consumables onto the torch head, used for standoff cutting. |
| The UNIMIG SC80 Standoff Guides keep distance between your plasma torch and the workpiece, extending consumable life. |
| The UNIMIG SC80 Cutting Buggy has been designed for you to be able to maneuver the torch with ease, whilst keeping the tip off of the workpiece at a levelled height. |
| UNIMIG SC80 Cutting tips have been designed with high shock-resistant materials to withstand high heat for extended consumable life. |
| UNIMIG Plasma Torch electrodes have been designed to give optimum power to provide a stable and effective arc. |
| Features Elite Vision Goggles |
|
ELITEVISION Lens Technology – greatly improves the optics of your helmet, letting you see a full spectrum of colours. It also helps to reduce eye fatigue making it safer for extended periods of welding.
|
|
2 Arc Sensors – 2 arc sensors constantly monitor the arc, allowing for consistent shade control so you can focus on your welds.
|
|
Provides 5-13 Shade control, as well as GRIND mode for use when grinding.
|
|
These goggles are suitable for MIG, TIG (Minimum 5A) & STICK welding, as well as plasma cutting.
|
|
Room for respirator – designed to be worn with an Elipse Half-Mask P2 Respirator, providing a minimum 99.95% filtration against odours, dust, all types of fumes, oil & water mists & micro-organisms.
|
|
The mask itself can also be removed so that only the goggles can be used.
|
|
Also feature an alternate elastic headband, giving you multiple options to wear the goggles as desired.
|
|
UV/IR Ray Protection – In combination with the ROGUE Welding Hood, the welding goggles & mask provide protection against UV/IR rays.
|
|
Lightweight & Compact – Allows welding in tight spaces where standard welding helmets are limited in space.
|
