- Solid Brass Construction
- On/Off Control Valves
- High Resistance to Any Potential Backfire
- Locks to Provide Secure Positioning
- Lightweight and Ergonomic
- Press Lever for Easy Cutting Use
| WHAT YOU GET: |
|---|
|
1 x UNIMIG Blow Pipe Handle, UF3H
|
|
1 x UNIMIG Gas Cutting Attachment, UF3CA
|
|
4 x UNIMIG Type 41 Oxy-Acetylene Cutting Tips,
Size 8 / Size 12 / Size 15 / Size 20
|
|
1 x UNIMIG Tip Cleaner, UFTC
|
|
1 x UNIMIG Flint Lighter, UFFL
|
|
1 x UNIMIG Combination Spanner, UFSPAN
|
|
1 x UNIMIG Gas Welding Goggles, UFGOG
|
|
1 x UNIMIG Gas Cutting Guide and Radius Bar, UFCG
|
| FEATURES: |
|---|
|
The UNIMIG Blowpipe Handle is designed and built for both oxy/acetylene and oxy/LPG applications.
|
| The Blowpipe Handle can be used for welding, cutting, heating and brazing applications. |
| It features a lightweight and ergonomic design which has been manufactured to ensure consistent quality and performance that you can depend on. |
| Solid brass construction. |
| On/off control valves. |
| Locks to provide secure positioning. |
| Features Mixer |
| The UNIMIG Gas Mixer is used for welding, heating and brazing with all oxy and fuel gas combinations. |
| Made from a solid brass construction, the UNIMIG Mixer connects to the blowpipe handle and offers high resistance to any potential backfire. |
| Can be used with oxy/acetylene, oxy/LPG or oxy/natural gas. |
| High resistance to any potential backfire. |
| Clip for hanging for convenience or excess heat. |
| For cutting, brazing, welding, heating. |
| Features Cutting Attachment |
|
UNIMIG Gas Cutting Attachment is compatible for both Type 41 (Oxygen/Acetylene) and Type 44 (Oxygen/LPG) tips.
|
| It features locking teeth for secure positioning. |
| Solid brass construction resulting in a durable frame that can also withstand high temperatures. |
| The design also prevents any harmful flashbacks. |
| Suits all TYPE 41 and TYPE 44 cutting tips. |
| Cuts up to 150mm plate. |
| High quality needle valve for fast and accurate flame adjustment. |
| O-ring seal to form a perfect gas-tight seal. |
| Press lever for easy cutting use. |
| Features Goggles |
|
When the shaded lenses are flipped up the user is still protected by a set of clear lenses. This also saves having to remove them in-between welding, brazing and cutting operations.
|
|
Made with a one piece polycarbonate lens which is great for gas welding, cutting and brazing.
|
|
Not only protecting your eyes from splashes and flying particles, but also limiting radiation.
|
|
For Oxygen / Acetylene / LPG / Propane.
|
|
Rated to shade 5
|
|
Also featuring lift up lens and vents to give good visibility before you weld while fitting over prescription or safety glasses.
|
|
Only suitable for gas welding.
|
|
Soft pliable frame comfortable to wear.
|
|
Non reflective matt interior finish.
|
|
Vented to prevent fogging.
|
| Features Spanner |
|
The UNIMIG Combination Spanner is built to accommodate five different nut sizes and can be used on various different gas equipment such as regulator valve nuts, hose connections and cutting attachments.
|
|
Five different nut sizes.
|
|
Fits all regulators.
|
|
For use on cutting attachment to switch tips/nozzles.
|
| Features Cutting Guide |
|
The UNIMIG Gas Cutting Torch Roller Guide is designed for easy cutting of straight lines.
|
|
It is fully adjustable, allowing the freedom for all types of movement whether you need it to be raised, lowered or tilted for angle cutting.
|
|
The cutting roller guide has been built with a non-jamming hub design and stainless-steel axles, meaning it is very effective and reliable when you need it to be.
|
|
This product also features a Radius Bar which connects to the roller guide for you to perform perfect circles or rounded edges..
|
|
Suits all type 41/44 gas consumables.
|
|
Adjusts into various different positions.
|
|
Non-jamming hub design.
|
|
Designed for straight and circle cutting.
|
| Features Type 41 Cutting Tips |
|
Designed with durable copper material, enhancing flame stability and improving the economy of gases, whilst also giving superior performance by minimising heat distortion.
|
|
Copper design.
|
|
Improved economy of gases.
|
|
Superior performance.
|
| Features Flint Lighter |
|
The UNIMIG Flint Lighter reliably starts gas torches safely, easily and quickly.
|
|
With added features such as a nickel plating for extra durability and extended lifespan, and the ability to replace the flint, this tool is great for users who don’t want to keep purchasing flint lighters over and over again.
|
|
Nickel-plated.
|
|
Replaceable flint.
|
| Features Tip Cleaner |
|
The UNIMIG Tip Cleaner is designed to remove carbon build-up from the inside of your gas tips.
|
|
Removes carbon build-up.
|
|
Greater consumable life.
|
|
Various different sizes to clean any tip.
|
|
Includes a flat file.
|
