Weldclass Cutforce 45P Plasma Cutter, Torch PFC – Optional Air Filter CF-06176

SKU: N/A

$1,469.00$1,824.00

  • The cut capacity of 20mm
  • The highest performing single-phase plasma cutters
  • Weighing only 8kg
  • Fitted with a 15A 240V plug
  • High-quality 6m torch with ‘Euro-style connection
  • Power Factor Correction (PFC)
  • Reliable Pilot Arc Ignition
  • Generator Friendly – min 8kva, ideal 10+kva
  • Stressed-Tested to 440V
in stock

Request Price Match

Please include full website address
null
What You Get:
1 x WELDCLASS Cutforce 45P Plasma Cutter (with Life Time After Sales Machine Support)
Plus Optional Choice: Weldclass Air Filter, PLATINUM Z-20 (Pictured)
1 x Plasma Torch 6m with Torch Parts Kit
1 x Air Regulator with filter & Nitto style air fitting
1 x Earth Lead 4m
1 x Large Carry Case
1 x Shoulder Strap
1 x Cable Strap
1 x Long Power Input Lead 3m

 

Features:
With a cut capacity of 20mm (clean cutting of mild steel), severance capacity of 25mm, and 45% duty cycle at maximum output, the Cutforce 45P is one of the highest performings single-phase plasma cutters on the market.
Weighing only 8kg and fitted with a 15A 240V plug, it’s also super portable and versatile.
Features a very high-quality 6m torch with ‘A euro-style connection, Air regulator with Nitto fitting, large carry case, and shoulder strap.
Power Factor Correction (PFC) – reduced power draw, increased duty-cycle, ideal for long leads & generators.
Reliable Pilot Arc Ignition – non-HF avoids EMF interference.
Generator Friendly – min 8kva, ideal 10+kva.
Intelligent Protection & Warning System – prevents costly torch damage.
Stressed-Tested – to 440V & over-specified componentry for reliability.
Perforated Plate / Expanded Mesh Cutting Mode.
PFC technology means the CF-45P is extremely power efficient, delivering a higher duty cycle for longer cuts and higher productivity, even on heavier section material.
With PFC, the CF-45P can be used on long extension leads (up to 100m) and is a great choice for operation on generator power, where required.
Features Air Filter
Increases Plasma torch parts life & reduces consumable costs.
Z-20 filter removes 99.97% of water, dirt & oil particles, significantly improving air quality.
Self-draining – engineered for low maintenance, “set and forget”.
High-performance filtration of water/moisture, dirt and oil particles down to 1 micron.
Z-20 filter cartridge lasts up to 6 months, or even 12+ months in cases of infrequent use = reduced cost. Roll filters require frequent cartridge replacement = ongoing cost
Specifications:
Part Number: CF-06176
Supply Plug: 15A 240V
Current Output: 20A – 40A
Plasma Cut Duty Cycle:
40A / 120V @ 30%
40A / 96V @ 45%
30A / 92V @ 100%
Mild Steel Quality Cut Thickness: <14mm
Mild Steel Recommended Cut Thickness: <20mm
Mild Steel Severance Thickness: <25mm
Stainless Steel Quality Cut Thickness: <12mm
Stainless Steel Recommended Cut Thickness: <18mm
Stainless Steel Severance Thickness: <22mm
Aluminium Quality Cut Thickness: <12mm
Aluminium Recommended Cut Thickness: <14mm
Aluminium Severance Thickness: <20mm
Air Requirements: Min 120 L/min (4.5cfm)
Dimensions incl Handle (mm): 520(L) x 150(W) x 310(H)
Weight: 8kg
Standard: AS 60974.1
Warranty: 3 Years
Specifications Air Filter
Filter Capacity: >1.0 Micron
Port Size: 1⁄4” Female (inlet and outlet)
Flow Capacity: 20 SCFM @ 100 psi
Max Pressure: 150 psi / 1,000 kpa
Self Draining: Yes
Dimensions (mm): 185(H) x 75(W) x 65(D)
Replacement Element / Cartridge: Part no. WC-06256
Weight:0.8kg

FREE DELIVERY CONDITIONS

Products labelled with the “Free Delivery” sticker will have N/A shipping charged to them on checkout, however, some are excluded. This includes items that are large & heavy, some clearance items, or items classed as dangerous goods. Some of these items will incur a delivery fee after the purchase has been made and some may not be available for delivery at all. Remote areas outside of Sydney MAY be excluded from free shipping, you will be contacted prior to delivery to confirm shipping charges if necessary. Electroweld reserve the right to change or withdraw free delivery at any time.

Store Pickup ($0)

You can place an order online and pay either using your card or PayPal account. If this item is in stock, you will be able to collect it instantly, to check inventory once you have purchased an item please call (02)9708 6660

Stock is not guaranteed until we have reserved stock for you under your order number.

Please wait for a confirmation email of the order being ‘ready for pickup’ before coming in-store to pickup.

Please quote your order number when you come to the store.

Pickup time is during our business hours.

Orders are usually cancelled after 7 days if it has not been picked up or no form of communication or response has been received.

Standard Delivery – NSW wide (From $8.90)

This is usually a 1-2 day service. Outer NSW areas can take up to 5 days.

Someone must be present at the delivery address during business hours to receive & sign, if no one is available you must put a note in the order instructions along with a suggested time and date for delivery. Additional delivery charges may apply if this process is not followed.

Special instructions can be included in the comments of your order

For overweight items or addresses outside our delivery network, you will see “TBC” (To be calculated) where the delivery price was. You will still be able to make your purchase and a representative for Electroweld will contact you with a shipping quote. You are not obligated to accept this quote. If TBC is displayed, the normal 1-2 day service cannot be guaranteed and the ETA on delivery will be included in the shipping quote.

Guaranteed Same Day (Express) – Sydney Metro Region (From $13.10)

Within the Sydney Metro area only.

If an order is placed before 10 am, and the item is in stock, you are guaranteed to receive your product before COB (Close of business) that same day. If these conditions are followed and our delivery partner does not get your package to you within the specified time frame, Electroweld will credit any shipping cost incurred by you.

Funds need to be cleared and orders dispatched before 10:30 am for same-day arrival within business hours. (Paying by direct deposit may delay the process)

Someone must be present at the delivery address during business hours to receive & sign. If no one is available you must put a note in the order instructions along with a suggested time and date for delivery. Additional delivery charges may apply if this process is not followed.

Special instructions can be included in the comments of your order

For overweight items or addresses outside our delivery network, you will see “TBC” (To be calculated) where the delivery price was. You will still be able to make your purchase and a representative for Electroweld will contact you with a shipping quote. You are not obligated to accept this quote. If TBC is displayed, the normal same-day service cannot be guaranteed and the ETA on delivery will be included in the shipping quote.

Interstate Delivery – Outside NSW (from $20.30)

For Interstate delivery, express post is not available unless specifically requested.

For overweight items or addresses outside our delivery network, you will see “TBC” (To be calculated) where the delivery price was. You will still be able to make your purchase and a representative for Electroweld will contact you with a shipping quote. You are not obligated to accept this quote. If TBC is displayed, the normal same-day service cannot be guaranteed and the ETA on delivery will be included in the shipping quote.

Special instructions can be included in the comments of your order

International

International shipping costs vary greatly depending on the destination country, when TBC is displayed, we will contact you with a shipping quote and ETA.

 

Please Note: Shipping times may be extended if a payment is made via direct deposit. Please Include the invoice number in the transaction title to expedite the process to get your order ASAP!!