– Specially developed for the braze welding of copper, brass, and bronze, and the brazing of copper and steel. |
– For universal braze welding. |
– Useable in either powder or paste form. |
– Suitable for use with Comweld Manganese, bronze, tobin bronze, nickel bronze and silicon bronze rods. |
WHAT YOU GET: |
---|
1 x Comweld Copper and Brass Flux, 250gr
|
FEATURES: |
---|
Specially developed for the braze welding of copper, brass, and bronze, and the brazing of copper and steel. |
For universal braze welding. |
Useable in either powder or paste form. |
Suitable for use with Comweld Manganese, bronze, tobin bronze, nickel bronze and silicon bronze rods. |
Highest quality flux. |
Procedure: The parts to be brazed must be clean with all traces of paint, oil and grease removed. Dip the heated end of the filler rod into flux as required. Flux may be mixed with water into a creamy paste and applied to rod and work before commencing. Wait until both edges of the joint begin to melt then apply the fluxed rod. Continue by melting each edge of the joint and the rod simultaneously. |