Enlarge
Dy-Mark 350g Silver Gal Bright Anti-Corrosive Spray Paint
39053510 0 Reviews
$12.50 inc gst
| Buy 10+ | $11.00 |
| Buy 20+ | $10.00 |
- Description
- Specifications
- Reviews
| WHAT YOU GET: |
|---|
|
DY-MARK Silver Gal Anti Corrosion Spray 350g
|
|
Choose Quantity Of Aerosol Cans: 1 x Can / 4 x Cans / 12 x Cans
|
| FEATURES: |
|---|
| - Dy-Mark’s Silver-Gal is a barrier type anti-corrosive silver paint designed to match the bright metallic lustre finish of ‘Hot Dip’ galvanising. Bright silver finish delivers a “new metal” appearance to painted surfaces |
| - Silver-Gal has excellent adhesion properties and provides a tough and durable finish on steel and iron. |
| - Durable topcoat for metal surfaces and recently welded surfaces. |
| - Although primarily designed for ferrous metals, the product can be used to provide a bright silver finish on other substrates. |
| - Silver-Gal is ideal for use on its own or as top coat over Dy-Mark’s Zinc Gal. |
| - Ideal for industrial and decorative applications. Best for galvanised surfaces such as fences, gates and railings, outdoor furniture and finishing repairs. Also can be used as a finishing coat for structural steel, trailers, guard rails, fencing, welded metal, gutters |
| - Perfect for touch ups and repairs on decorative surfaces and for light industrial applications |
| - Lead Free |
| - Made in Australia. |
- Anti-corrosive silver paint
- Designed to match the bright finish of hot dip galvanising
- Provides a tough and durable finish to steel and iron
- Ideal for industrial and decorative applications
- Suitable for use as a top coat over Dy-Mark's Zinc Gal
| SPECIFICATIONS: |
|---|
| Volume: 350g |
| Coverage: Approximately 2 square metres per can |
| Drying Time: Touch dry in 20 minutes (25°C) |
| Recoat: Recoat after 1 hour. Hard dry in 16-24 hours. |
| Finish: Bright Metallic Silver Lustre. |
| Recommended Primer:For superior protection and adhesion on mild steel surfaces and welds it is recommended to prime with Dy-Mark Zinc Guard Cold Galvanising Coating and allowing it to dry for 4-6 hours before applying 2 coats of Dy-Mark Zinc Guard Silver Bright. For non-ferrous metals such as aluminium, alloys, ZINCALUME, and stainless steel use Dy-Mark Zinc Guard Etch Primer. |
|
Suitable Surfaces: Steel, iron and non-ferrous metals with appropriate primer.
|
|
Standards: AS3750.9:2009 Type 1
|
Recommended Products
-
2 Piece BOSCH Cordless Brushless Bundle *18V 8Ah Hammer Drill + Impact Driver + Batteries + Charger*
$779.95
Add to Cart
-
UNIMIG SB24 Mig Welder Torch Gun *Set up for Aluminium Welding*
$180.95
View Options -
5kg - 3.2mm Filler Rods ER316L UNIMIG Stainless Tig Welding Wire Sticks
$109.95
View Options -
Knob Label 20 LPM Reg EDGE Series 3 (310411)
$7.58
Add to Cart
0 Posted Reviews
Post a Review