– Italian made – LCD Display
– Trigger Modes
– Pulse-On-Pulse
– Easy-Mode
– Root MIG Mode
– Pulse Wave Adjustments
– Wave OS Software
– Push-Pull Ready
| WHAT YOU GET: |
|---|
| 1 x WELDCLASS Ultra 220MP Dual Pulse Welder |
| 1 x MIG Torch BZL 25, 3m |
| 1 x Gas Regulator |
| 1 x Earth Lead 4m |
| 1 x Driver Roller for 1.0/1.2mm Aluminium wires |
| 1 x Driver Roller for 0.8/0.9mm Steel/solid wires |
| FEATURES: |
|---|
| Made in Italy to Weldclass specifications, in one of Europe’s largest & most experienced welding machine manufacturing plants. |
| Very easy to operate with a large Colour LCD Display and intuitive, easy-to-follow controls. |
| Swiss-made intelligent wire drive system with Tacheometric Control: Machine software monitors wire feed speed against weld parameters, at intervals of more than 100 times per second, and automatically applies “micro-adjustments” for exceptionally smooth and reliable wire feeding. |
| Remote amp +/- controls on MIG torch handpiece. |
| Push-Pull Ready: Software pre-configured & ready for use with optional Push-Pull MIG Torch. |
| Job Save to capture specific parameters/settings with custom naming and easy recall for the next time you need to repeat the same job/weld. |
| USB interface allows fast & easy software upgrades throughout the life of the machine, plus importing & exporting of saved settings between multiple 220MP machines. |
| Wave OS (operating system) software enables the recording, download (via USB) and full analysis of weld data – useful for: critical and high-compliance applications and training purposes. |
|
FUNCTIONS:
– PoP (Pulse-on-Pulse / Double Pulse) mode – AB Pulse (Single Pulse) mode – Easy-Mode (available in a single pulse and non-pulse modes), ideal for beginner pulse welders: simplifies screen/controls & prevents unintentional adjustment of the wrong parameter – Pulse wave adjustments: Start Current amps/time, Start-Slope time, Main Current, Secondary Current & Frequency (double pulse), End Slope time, End Current amps/time – Root MIG mode: Used with mild steel wire only. Enables gap-filling & first-pass (root) welding of pieces that are spaced apart (poor fit-up, gaps, cracks, etc) that traditionally would only be achievable by TIG welding. Weld pool is typically colder than the arc for very low heat & minimal distortion.
– Trigger modes: 2T, 4T & unique 4T Bi-Level which allows the operator to “manually double-pulse” (manually switch between primary and secondary current levels by quickly pulling then releasing the trigger) – Other MIG Adjustments include: Arc Length, Inductance, Soft Start, Burnback, Pre-Gas time, Post-Gas time, Spot Weld time – Stick/MMA Adjustments include: Hot-Start %, Arc-Force % |
|
APPLICATION & CAPABILITY INFO:
– Single or Double Pulse MIG welding 20-220A with Aluminium (0.8-1.2mm wires / 0.8-5.0/6.0mm material*), Stainless-Steel (0.8mm wire / 0.8-5.0mm material), & Bronze/Brazing (0.8-0.9mm wires / 0.8-
5.0mm material)
– Conventional Non-Pulse MIG welding 20-220A with solid mild steel (0.6-1.2mm wires / 0.5-10mm material), stainless-steel (0.8-1.0mm wires), aluminium (0.8-1.2mm wires / 3-8mm material) & bronze/brazing
(0.8-0.9mm wires)
– Pulse MIG welding with optional Push-Pull MIG Torch and 0.8-1.2mm wires – Stick/MMA welding 20-160A with most types of common electrodes (2.0-4.0mm), including steel, stainless steel, hard facing & more – TIG welding 20-160A (DC Lift-Arc) of steel, stainless, copper & chrome molly up to 4mm max thickness (NOT suitable for TIG welding of aluminium – this requires AC/DC TIG capability, such as the
Weldforce 202T)
|
){kind=link}