The RAZOR 350 SWF is a powerful workshop machine with MIG, TIG and STICK welding functions. This machine features the added flexibility of a Separate Wire Feeder unit, allowing up to 10m of extra manoeuvrability in the workshop. Built with solid construction, this machine is designed to withstand the toughest conditions. The RAZOR™ 350 SWF is also Spool Gun and Push-Pull Gun ready, providing MIG welding capabilities across every spool size.
| What You Get: |
|---|
|
1 x RAZOR 350 SWF MIG/TIG/STICK Welder – (with Life Time After Sales Machine Support)
Please note, it is standard that these welders do not come with a plug. We will supply and fit the plug before we ship, so allow a day to do this before shipping.
|
|
1 x UNIMIG PAPR Welding Helmet (U21014K) System Includes:
1 x Auto-darkening welding helmet
1 x PAPR blower unit with attached battery and filter
1 x Belt / Harness
1 x Battery Charger
1 x Airflow indicator
1 x Instruction manual
1 x Carry Bag
|
|
1 x Separate Wire Feeder Unit
|
|
1 x 4m SB36 MIG Torch
|
|
1 x 10m Interconnecting Cables
|
|
1 x 4m Twist Lock Electrode Holder
|
|
1 x 500 Amp Earth Clamp & Lead
|
|
1 x Twin Gauge Argon Regulator
|
|
1 x 2 Metre Gas Hose Complete with fittings
|
|
1 x Operating Manual
|
|
PLUS Plug Fitted to Customer Specifications:
10 Amp / 20 Amp / 32 Amp / Custom Plug (please email us)
|
| Features: |
|---|
| The RAZOR™ 350 SWF is a powerful workshop machine with MIG, TIG and STICK welding functions. |
| There is also support for both gas shielded MIG and gasless MIG wire. There is no need to swap between machines, saving you time and setup. |
| This is an industrial machine equiped with a separate 4 wheel gear driven wire feeder and 10m interconnecting cables. |
| The MIG function allows you to weld with solid and Flux Cored Gasless wires. |
| Adjustment of Voltage & Wire Feed at the wire feeder make for easy setting of welding parameters and give the convenience of remote adjustment from the power source. |
| This machine features the added flexibility of a Separate Wire Feeder unit, allowing up to 10m of extra manoeuvrability in the workshop. |
| Wire inch and gas check provides set up of wire feed and gas setting without any waste of wire or gas. |
| Added MMA welding capability delivers easy and high quality welding using electrodes, including cast Iron, stainless steel and low hydrogen. |
| Three phase 415V power. |
| Four geared roller drive unit providing the most consistent and smoothest wire feed. This also assists with using longer MIG Torches. |
| Crater Current setting delivers perfect finishing of the weld, the electronic Inductance offers fine adjustment of the arc characteristic and Burn Back adjustment leaves the wire out ready for the next weld. Wire Inch and Gas Check provides set up of wire feed and gas setting without wastage of wire or gas. |
| Spool Gun and Push-Pull Gun ready, providing MIG welding capabilities across every spool size. |
| Push-Pull Guns provide the smoothest wire speed, especially when MIG welding Aluminium. The ‘Pull’ motor in the torch allows the wire to be fed over a much longer distance, giving you more flexibility to move and manoeuvre whilst MIG welding. |
| Designed for superior performance and manoeuvrability, offering the highest quality of welds from UNIMIG’s range. |
| Built with solid construction, this machine is designed to withstand the toughest conditions. |
|
Features Unimig PAPR Helmet
|
|
The powered respirator keeps fresh, clean air pumping around your face so that you can breathe easily while you weld.
|
|
Provides industrial level protection for the most extreme welding applications and environments where effective and reliable eye and respiratory protection is an absolute must.
|
|
It has a filter efficiency of 99.996% @ 0.3um, which means that welding fumes, particles and gases are all being filtered to provide you with clean, fresh air.
|
|
The 12-volt, 4400MAh lithium-ion battery provides for up to 8 hours use on level 1, 6 hours on level 2, and 4 hours on level 3 airflow setting.
|
|
ELITEVISION™ Lens Technology greatly improves the optics of your helmet, letting you see a full spectrum of colours. It also helps to reduce eye fatigue making it safer for extended periods of welding.
|
|
External grind button, so you can keep it on while you’re grinding, no need to remove your safety gear or fiddle around with flip lens or hoods.
|
|
With a built-in 4400mAH lithium-ion battery, it’s quick and easy to recharge with the supplied power adapter. Up to 8 hours of battery life on the lowest intensity settings, you can work an entire shift before it needs to be charged again. Lasts up to 4 hours on the highest intensity setting.
|
|
Welding helmet lenses are graded on a rating system from 1 to 3 across four categories, with 1 being the highest and 3 being the lowest. This helmet features the maximum 1/1/1/1 classification for optical quality, diffusion of light, light consistency and angle dependence.
|
|
The three most frequently used settings can be stored and reactivated easily by using the three memory buttons on the Auto-Darkening Filter (ADF).
|
|
Positive pressure system that provides constantly stable clean air
|
|
Long-lasting reliable P2 filter.
|
|
Auto shutdown mode.
|
|
3 airflow levels for varied working conditions.
|
|
Flashing and audible alarm indicates low battery, low airflow, filter blockage and high battery temperature.
|
|
The respirator unit is fitted with a spark filter and replaceable pre-filter to protect and extend the life of the main filter.
|
|
Shoulder harness for extended wear.
|
|
Side or rear mounting of respirator pack.
|
|
Controls down after 30mins of no use.
|
|
The LCD display clearly shows airflow level, battery charge level and filter status.
|
|
The ergonomic design, lightweight shell, fully adjustable head gear & back harness delivers maximum comfort during long welding periods.
|
|
The quick-disconnect and swivel breathing tube provides easy adjustability to accommodate space restraints.
|
|
Features the latest digitally-controlled auto darkening filter, adjustable from shade 5-9 and shade 9-13 makes it ideal for MMA, TIG and MIG welding, as well as Plasma Cutting and even grinding applications.
|
